The iPhone 13 Pro is known for its advanced technology and high-quality display, but accidents happen, and screens can get damaged. If you’re dealing with a broken screen, this guide will help you replace it using the LCD Digitizer Touch Screen Assembly, compatible with iPhone 13 Pro models A2638, A2483, A2636, A2639, and A2640.
Understanding the Components
LCD Display: The iPhone 13 Pro’s display delivers stunning visuals with high resolution and vibrant colors. The LCD technology ensures excellent brightness and clarity.
Digitizer: This component is responsible for detecting touch inputs and translating them into actions on your screen. The digitizer is integrated with the LCD display in this assembly.
Touch Screen Assembly: This unit combines the LCD display and digitizer, ensuring seamless touch functionality and visual output.
Identifying Your iPhone Model
Before starting the replacement process, confirm your iPhone 13 Pro model. The compatible models for this replacement are:
- A2638
- A2483
- A2636
- A2639
- A2640
You can find your model number by checking the back of your iPhone or navigating to Settings > General > About > Model Number.
Tools and Materials Needed
For the replacement, you’ll need:
- Replacement LCD Digitizer Touch Screen Assembly
- Precision screwdriver set
- Suction cup
- Plastic prying tools
- Tweezers
- Adhesive strips (for reassembly)
- Heat gun or hairdryer (optional, for loosening adhesive)
Step-by-Step Replacement Guide
1. Power Off Your iPhone
Ensure your device is powered off to prevent any electrical damage or accidental inputs during the repair.
2. Remove the Pentalobe Screws
Using a pentalobe screwdriver, remove the two screws located at the bottom of the iPhone near the charging port.
3. Use the Suction Cup and Prying Tools
Attach the suction cup to the lower half of the screen. Gently pull up to create a small gap between the screen and the body. Insert a plastic prying tool into the gap and carefully work your way around the edges to loosen the adhesive. Be cautious not to damage the internal components.
4. Disconnect the Battery
Once the screen is lifted, you’ll see several connectors. It’s crucial to disconnect the battery first to prevent any short circuits. Use a screwdriver to remove the screws securing the battery connector bracket, then use a plastic tool to disconnect the battery.
5. Disconnect the Display Connectors
Remove the screws securing the display connectors’ bracket. Carefully disconnect the display and digitizer connectors using a plastic tool.
6. Transfer Components to the New Screen
If your new screen assembly does not come with pre-installed components like the front camera, earpiece speaker, and sensors, you’ll need to transfer these from the old screen. Use tweezers and a screwdriver to carefully remove these components and install them on the new screen.
7. Reconnect the Display and Battery
With the new screen ready, reconnect the display and digitizer connectors to the motherboard. Reattach the connector brackets and secure them with screws. Finally, reconnect the battery connector and secure its bracket.
8. Reassemble the iPhone
Align the new screen with the body of the iPhone and press it firmly into place. Ensure that the adhesive seals properly around the edges. Reinstall the two pentalobe screws at the bottom of the device.
9. Power On and Test
Power on your iPhone and test the new screen to ensure it functions correctly. Check for display quality, touch responsiveness, and proper functioning of transferred components like the front camera and sensors.
Conclusion
Replacing the screen on your iPhone 13 Pro (models A2638, A2483, A2636, A2639, A2640) can restore its functionality and appearance. By following this guide and using the right tools and components, you can successfully perform the replacement. However, if you’re not comfortable with DIY repairs, seeking professional assistance from an authorized service provider is always a good option to ensure the best results.
admin@
Great Quality Screen, Fast repair and very satisfide.